Production and installation steps of automatic numerical control three-axis

Automatic CNC three-axis production and installation steps are as follows:

1. Design and planning: Before starting production, design and planning work needs to be carried out. Determine the function and performance required by the system, and draw the corresponding design drawings. According to the design drawings, determine the required materials and parts.

2. Material preparation: according to the list of materials required by the design drawings, select the appropriate materials, and carry out pretreatment work such as cutting, processing and polishing. Ensure that the size and flatness of the material meet the requirements.

3. Parts production: according to the design drawings, the material is processed into various parts. The use of machine tools and other tools, milling, drilling, cutting and other processing technology, so that the shape, size and precision of parts meet the design requirements.

4. Assembly: assemble the manufactured parts. According to the assembly process sequence, the various parts are gradually assembled. Ensure that the connection between the various parts is tight and stable, and ensure the stability of the overall structure.

5. Debugging: After the assembly is completed, the system needs to be debugged. Check the normal operation of each function module and adjust the position and angle of each component to ensure that the whole system can work normally.

6. Installation: Install the fully automatic CNC three-axis that has been debugged to the target position. According to the situation on site, choose the appropriate installation method and fixing method to ensure the stability and safety of the equipment. At the same time, according to the needs of the system, electrical connection and wiring work.

7. Test: After installation, test the automatic CNC three-axis. Check the operation of each functional module, test the positioning accuracy and motion stability of each axis to ensure that the system can work normally.

8. Adjustment and optimization: According to the test results, the automatic CNC three-axis is adjusted and optimized. According to the actual use, adjust the various parameters and control methods, so that the performance of the system to achieve the best state.

9. Confirmation and acceptance: after adjustment and optimization, the final confirmation and acceptance work. Check whether the various indicators and performance of the system meet the design requirements to ensure that the equipment can meet the needs of users.

10. Complete the documentation: Finally, complete the production and installation of the relevant documentation work. Including design drawings, assembly drawings, commissioning records, etc. Organize and archive these documents for subsequent maintenance and management.