How to deal with abnormalities or failures in CNC bending machine operation.

1. fault diagnosis
When the CNC bending machine is abnormal or faulty, fault diagnosis must be carried out first. Check the error code or fault prompt through the display screen or control panel of the device to understand the specific fault type. At the same time, according to the abnormal performance of the sound and vibration of the equipment, the cause of the fault is assisted.
2. safety shutdown
When the CNC bending machine is found to be abnormal or faulty, the emergency stop button should be pressed immediately to ensure that the equipment is completely stopped. Avoid continuing to operate in a faulty state to avoid greater losses or safety hazards.
3. emergency measures
After the equipment is shut down, emergency measures should be taken to ensure the safety of personnel and equipment. For example, turn off the power to prevent accidental activation of the equipment; clean the work area and remove debris that may cause slips or falls; evacuate personnel to ensure the safety of the site.
4. Notification Maintenance
After taking emergency measures, professional maintenance personnel should be notified in time for troubleshooting and repair. Detailed fault information and equipment status can be provided to maintenance personnel by telephone, SMS or email.
5. investigation reason
After the maintenance personnel arrive at the scene, they should conduct detailed troubleshooting to find out the cause of the failure. By checking the circuit, mechanical structure, hydraulic system and other key components of the equipment, the causes of the failure are analyzed, and the corresponding repair plan is formulated.
6. Record Failure
After handling the fault, the fault information, handling process and results shall be recorded in detail in the equipment maintenance log. This is helpful to analyze the failure law of the equipment and provide reference for the subsequent equipment maintenance and management.
7. preventive maintenance
In order to avoid abnormalities or malfunctions of the CNC bending machine, preventive maintenance should be carried out regularly. Including cleaning equipment, checking the wear of key components, replacing wearing parts, lubricating mechanical structures, etc. Through preventive maintenance, the service life of the equipment can be extended and the stability of the equipment can be improved.