Matters needing attention in the process of operating CNC roll bending machine
Release time:
2024-03-08 17:41
1. When the machine tool is working, suoy personnel are forbidden to enter the space swept by the rotating arm and pipe fittings!
2. The hydraulic system of the machine tool adopts YA-N32 ordinary hydraulic oil (original brand No. 20). Under normal circumstances, G is changed once a year, and the oil filter 0 must be cleaned at the same time.
3. When adjusting the machine tool (mold), the adjuster should press the button to adjust. It can be adjusted by one person on the machine tool and operated by another person on the control cabinet.
4. The core rod should be removed when adjusting the machine tool or driving empty. CNC bending machine manufacturers
5. The pressure of the hydraulic system shall not be greater than 14Mpa.
6. When manually adjusting the speed of the side cylinder, the rotating arm shall be rotated to ≥ 900 for adjustment. The adjustment speed shall be synchronous with the linear speed of the rotating arm rotating the edge of the bending die. It is forbidden to push and push the lower side at a speed greater than the linear speed of the rotating die edge in the manual state.
7. After the general machine is used for a period of time, the tightening degree of the chain should be checked to keep the upper and lower chains tight.
8. In the core bending mode when the numerical control roll bending machine operates automatically, the operator must have the core head inside the pipe before the bending arm returns, or the core shaft is not blocked when the bending arm returns, otherwise, the core head or the core rod may be bent or broken.
Previous Page
Previous Page
Related News
Advantages of fully automatic CNC three-axis rolling bending machine.
2023/12/14 15:27
Things to note when using the fully automatic CNC rolling bending machine.
2023/12/14 15:22
The accuracy of the fully automatic CNC three-axis rolling bending machine is very high.
2023/12/14 15:16
Production and installation steps of automatic numerical control three-axis
2023/12/14 15:06
Contact Us
Add: Dangjia Shaoxi Industrial District, ShiZhong District,Jinan City, Shandong Province, China
Tel: +86-188-6661-6935
Phone: +86-531-85989363
E-mail: abk1@bendingcnc.com
Http: www.jnwyj.com www.jndzsb.com
Copyright 2024: jinan dezhong machinery co., ltd. Website Construction:300.CN Jinan2 SEO Business License
